You are currently viewing 5 Sealcoating Blunders Your Asphalt Pavement Doesn’t Appreciate

5 Sealcoating Blunders Your Asphalt Pavement Doesn’t Appreciate

An asphalt parking lot or a driveway is a significant investment for any business or homeowner. Protecting this investment should be a priority to maintain curb appeal and prevent costly repairs.

However, asphalt pavement can become dry and brittle over time due to weathering and other environmental factors like ultraviolet rays. It causes the surface to crack and crumble, making it a hazard for anyone walking or driving on it.

The Solution – Seal Coating:

One way to protect your asphalt and extend its life is by seal coating it. Seal coating is a process where a liquid sealant is applied to the asphalt surface. It is a barrier to the elements, keeping the surface looking new.

While seal coating is a great way to protect your asphalt, there are a few things to avoid to maintain its longevity.

Here are five seal coating blunders to avoid:

Applying the Sealant Too Thick:

We understand that you’re anxious and want to ensure the job is done right. But, resist the urge to go overboard with the sealant. Applying it too thick doesn’t improve or multiply its ability to protect your asphalt. It can do the opposite by causing the sealant to crack and peel. It will leave your asphalt vulnerable to water and other elements.

Insufficient Surface Preparation:

A pavement has nooks and crannies for water, dirt, and debris to accumulate. Suppose you don’t take the time to clear out these areas before applying the sealant. In that case, you’re essentially trapping all of that junk beneath a layer of sealant. It will cause your pavement to degrade quicker. Not to mention, it just looks terrible.

You can avoid this by using a power washer to blast away all the debris. It will also help ensure that the sealant adheres properly to the surface.

Not Applying in Ideal Weather Conditions:

You might be thinking, “seal coating is a summer job.” And while the majority of jobs are suitable during the hotter months, that doesn’t mean you can’t apply sealant in cooler weather.

Ideal temperature conditions for applying sealant are between 60 and 90 degrees Fahrenheit. If it’s too hot, the sealer will dry too quickly and won’t have time to adhere to the surface properly. If it’s too cold, the sealer will be challenging to work with and might not adhere properly.

Not Giving the Asphalt Enough Time to Cure:

Once the sealer has been applied, it’s essential to give it time to cure properly. It can take anywhere from 24 to 48 hours, depending on the temperature and humidity levels.

If you try to use the surface too soon, you risk damaging the sealer and undoing all your hard work. You may also track the sealer into your home or business, which is a big mess to clean up.

Not Using the Right Equipment:

Sealcoating is a big job, and it’s vital to have the right tools for the job. Otherwise, you risk damaging your asphalt surface or not getting the job done correctly. Without the proper equipment, you might also waste a lot of sealer, which is expensive.

Hiring a professional contractor with the appropriate equipment and experience to seal coat your residential driveway or business’s parking lot is preferable. They understand how to use them, and they have access to specialized tools like a pressurized sprayer.


At Action Asphalt, serving Stockton, we understand the importance of asphalt maintenance and offer quality seal coating services.

Get a free quote, and rest assured that we will make no blunders on your property.