You are currently viewing 11 Steps To Successfully Laying A New Asphalt Driveway

11 Steps To Successfully Laying A New Asphalt Driveway

Key Takeaways:

  • Determine the size and shape of your driveway.
  • Choose the location of your driveway.
  • Excavate the area for your driveway.
  • Install a subgrade layer, a base layer, a binder layer, and a surface layer.
  • Compact the asphalt layers.
  • Finish the edges of your driveway.
  • Cure the asphalt and follow regular maintenance.
  • Action Asphalt offers paving services to customers in Roseville, CA, and the surrounding areas.

Suppose you have decided to lay a new asphalt driveway, congratulations! It is a big decision that will improve the look and functionality of your home. However, it is essential to remember that there is more to laying a new asphalt driveway than just dumping some material on the ground and calling it a day. Action Asphalt will outline eleven steps to successfully laying a new asphalt driveway.

11 Steps to Successfully Laying a New Asphalt Driveway

1. Plan Your Project

The first step to successfully laying a new asphalt driveway is to plan your project. You will need to determine the size and shape of your driveway and how much asphalt you will need to purchase. Before starting your project, you must also have all the necessary tools and equipment.

Also, read our blog on the excavation tips for a gravel driveway in Roseville.

2. Choose the Right Location

The next step to successfully laying a new asphalt driveway is to choose the correct location. The location should be level and well-drained, as water can cause the asphalt to crack and crumble. Additionally, the location should be large enough to factor in the size of your driveway.

3. Prepare the Subgrade

Once you have chosen the location for your new driveway, you will need to prepare the subgrade. The subgrade is the layer of soil that lies beneath the asphalt. To prepare the subgrade, you will need to remove any vegetation, organic material, and loose or uncompacted soil. Once this has been done, you will need to compact the subgrade with a roller compactor.

4. Install a Subbase

After the subgrade has been prepared, you will need to install a sub-base. The sub-base is a gravel layer that helps support the asphalt and prevent it from cracking. To install the subbase, you will need to spread a layer of gravel over the prepared subgrade and compact it with a roller compactor.

5. Install a Drainage System

It is also essential to install a drainage system before laying the asphalt driveway. A properly installed drainage system will help to prevent water from pooling on your driveway and causing damage. The most common type of drainage system for an asphalt driveway is a French drain, consisting of a perforated pipe buried beneath the gravel in the subgrade layer.

6. Heat the Asphalt

Once you have prepared the base and installed a drainage system, you will need to heat the asphalt. Heating the asphalt makes it more pliable & easier to work with. The best way to heat asphalt is in an asphalt heater, which can be rented from most construction equipment rental stores.

7. Spread the Asphalt

Once the asphalt has been heated, you can begin spreading it on the prepared base. It is essential to spread the asphalt evenly so it is of consistent thickness throughout your driveway. A standard thickness for an asphalt driveway is between two and four inches.

8. Install Asphalt Paving

Once the sub-base has been installed, you will be ready to install the asphalt paving. It can be done by hand or with a machine called an asphalt paver. When installing asphalt paving, it is crucial to ensure it is level and smooth. Otherwise, your driveway may not look its best or may not last as long as it could.

9. Compact Asphalt Paving

After spreading the asphalt, you must compact it to adhere correctly to the base layer. Packing the surface can have a hand tamper or a gas-powered plate compactor. It is crucial not to over-compact the asphalt, as this can cause cracks or divots in its surface.

10. Allow Curing Time

After compacting, the asphalt must allow cure time before using your new driveway. Cure time allows for proper adhesion between the base layer and the new asphalt driveway surface; without it, your driveway may not last as long or perform as well as it could. Depending on weather conditions, the cure time can take anywhere from 24 hours to several weeks. Check with your local paving contractor for guidance on how long the cure time should be in your area.

11. Seal Asphalt Paving

To protect your new driveway and extend its lifespan, you must seal it with an asphalt sealer. It helps to fill in any cracks or voids in the pavement and prevents water from seeping in and causing damage. Sealing should be done every 1-2 years or as needed depending on weather conditions and wear and tear.

11 Steps to Successfully Laying a New Asphalt Driveway

Maintenance Tips for New Asphalt Driveway

  1. To keep your new asphalt driveway in good condition, regularly sweep away any debris, such as leaves or twigs. Removing snow or ice as soon as possible is essential, as these can damage the driveway’s surface.
  2. If you notice any cracks or other damage to your asphalt driveway, it is vital to have them repaired quickly. Cracks can let water seep into the underlying layers of the driveway, which can cause further damage and even lead to pothole formation.
  3. Asphalt driveways should be resurfaced every few years to keep them looking their best and prevent further damage. Resurfacing involves applying a new layer of asphalt over the existing surface of the driveway.
  4. Having your asphalt driveway resurfaced is also a good idea to have any cracks or other damage repaired simultaneously. It will ensure that your new surface lasts many years and looks its best.
  5. Remove any vegetation that is growing on or around your driveway.
  6. Repair any damage to the edges of your driveway with an asphalt edge repair material.
  7. Grade your driveway regularly to ensure proper drainage.
  8. If you need to repair your driveway, hire a professional paving contractor who specializes in asphalt driveways

Following these simple tips, you can maintain your new asphalt driveway and keep it looking new for several years!

Click here to read the asphalt maintenance guide.

Need Paving Services in Roseville, CA? No Problem!

If you’re in the market for a paving contractor, look no further than Action Asphalt. We have a long history of providing quality paving services to residents and businesses in Roseville and the surrounding areas. In addition to our years of experience, we use only the highest-quality materials available, so you can be sure your pavement will last for many years.

Contact us today for a free quote on your upcoming project!