Action Asphalt & Concrete completed asphalt repair and concrete improvements at the PG&E facility in Auburn, California. The project involved removing damaged pavement sections, installing new asphalt surfaces, and replacing select concrete areas to restore safe and functional access throughout the property.
Work was coordinated in phases to minimize disruption and allow weekday operational access.
Asphalt Repair Scope
- Saw cut and remove damaged asphalt areas to the specified depth
- Haul and dispose of removed material off-site
- Compact existing base material to prepare the subgrade
- Apply SS-1h tack binder to vertical edges
- Install new hot mix asphalt to specified depth
- Roll and compact asphalt surface for proper placement
- Work was completed in two construction phases during weekday operations to maintain access for the facility.
Concrete Installation Scope
- Concrete Installed: 776.38 square feet across four repair areas
- Saw cut and remove existing concrete to a depth of 6 inches
- Install a double mat of #4 rebar at 18-inch centers
- Form and pour new concrete using a 5-sack mix
- Finish surface with a broom finish texture
- Coordinate work during weekday operations
Result
The completed improvements restored pavement functionality and addressed damaged asphalt and concrete areas within the PG&E facility. Phased scheduling allowed work to proceed efficiently while maintaining site access.
Action Asphalt & Concrete provides commercial asphalt paving, concrete services, parking lot improvements, and pavement maintenance throughout California and Nevada.
